These pumps with peripheral impeller are able to offer high pressure in relation to comparatively low powers and which have particularly steady operating curves.
For the correct functioning of the pump, pump clean water, or non-aggressive liquids only, without sand or other solid impurities.
They are qualified in domestic fitting, to increase the system pressure in aqueducts and for automatic water distribution by autocalve tanks and by hydrosphere units.
Pumps should be installed in a covered area, protected against the weather.
Pump body: cast iron
Motor housing: Aluminum
Shaft: 45#steel/stainless steel
Motor: closed, externally ventilated
Protection class: IP44/54
Duty: continuous rated
Mechanical seal: ceramic steatite/metalized carbon
Max.ambient temperature up to 40oC
Max.fluid temperature up to 80oC
Max pressure up to 10bar